Used by the United States Navy, Inland Marine's complete inflatable boat restoration kit includes one each of Sealant, Liquid Rubber (Gray only), Numbering Stencil Kit (Black only), and a quart of Topside Paint in your choice of black, white or gray. If purchased separately, the retail value of these products equal $162.55! Today, it's yours for only $129.99!
Inland Marine Sealant® is specially formulated for use with inflatable boats, rafts and tow toys. This sealant forms a bond with the interior fabric of the inflatable, stopping or "sealing" slow leaks and preventing future leaks from developing.
In one easy step, leaks are cured from the inside, which are virtually impossible to find from the outside. Inland Marine Sealant is the only product of its kind which allows for future deflation of your inflatable (for storage, etc.) without the skin sticking to itself and making re-inflation virtually impossible. This is why Inland Marine Sealant has earned a 5-Star product rating from West Marine™, and is has been used by the US Navy and Yachters worldwide since 1986.
If you are having a difficult time locating the leak in your raft, kayak, tow toy, or dinghy, you need to use Inland Marine USA Sealant, because our Sealant is especially helpful in fixing those difficult slow leaks that are not easy to find. Our Sealant provides a strong bond that should last for years when applied according to the easy instructions.
It will seal the leak(s) and keep your inflatable firm for years to come. And Inland Marine USA Sealant can be used multiple times, so if your inflatable develops a new leak weeks or years from now, you can use the sealant again!
Click the next arrow, below, for more information!More...
Inland Marine USA Sealant flows faster than water. The viscosity of our sealant was specially formulated by our chemist to repair inflatable boats and make them reliable – even in rough seas.
You might compare our Sealant to a sheet of Kevlar. Kevlar can stop bullets; a 2 mil thickness of Inland Marine USA Sealant can stop air up to 90 PSI. In tests, we have even sealed soccer balls and used them in games, bounced them on concrete, and kicked them as hard as we could without leaks.
Since 1986, our sealant has been used by boaters around the world to repair inflatable boats of all kinds. The product is used by professional raft repair companies, US Navy Seals, and individuals like you for inflatable boat repair.
Some manufacturers even use Inland Marine USA sealant to repair boats in their Quality Assurance Test. Slow leaks can be difficult or even impossible to find, but our sealant will solve all your slow leak problems in minutes!
Inland Marine Liquid Rubber® is truly a unique breakthrough in the rubber field. For the first time we are able to get 100% pure EPDM liquid-form rubber to cure without vulcanizing (applying high heat and pressure at the same time, which is what the manufacturer did when your boat was made). The consistency of honey, Liquid Rubber "paints" on to form a seamless, leakproof membrane of pure rubber. Available in black, gray or white, one quart will renew a 10-foot boat with a coating 5-7 mils thick, when applied according to the easy-to-follow instructions. (If you can paint a wall, you can do this!)
Since the original skin of most inflatable boats is 5-6 mils thick, Liquid Rubber truly renews and restores your boat to its new condition, even if your boat has lost some of its outer skin and even if the fabric is showing through. Years of use can wear the outer surface of your inflatable; abrasion and UV exposure can make your boat look old and worn-out and can cause slow leaks. Use Inland Marine Liquid Rubber to spot-repair or reinforce those heavy wear spots before they wear through. Or, re-skin the entire boat with Liquid Rubber to add years of serviceability to your boat. Liquid Rubber can be used again and again in the future to restore your boat's original look. Available in three (3) colors to help match your original inflatable skin color.
Liquid Rubber comes in three colors. Grey (the color of many new inflatables), Black, and White. You may not want or need to paint your inflatable after you use Liquid Rubber to re-skin it. However, if you do want to paint it, you should use Inland Marine USA’s Topside Paint.Our Topside Paint is mixed with our Sealant to provide an extra bond and seal for your inflatable. Elasticity is important when painting an inflatable boat and Inland Marine's Top Side paint exceeds these requirements. Your inflatable boat will expand and contract when it is exposed to the sun and shade. If the paint you use does not have the elasticity to adjust to these changes, it will crack and peel. Inland Marine USA provides Topside Paint in seven (7) colors so you can paint your boat, or creatively make it unique and easier to find when in a busy port of call.
This is not the paint your Daddy used on his boat! (And not anywhere close to the paint sitting next to it on the shelf at your marine store.) Inland Marine Top Side Paint® is specially formulated to have the elasticity and UV resistance required for use with inflatable boats. Because inflatable boats expand in the hot sun and contract at night in the cooler temperatures, constantly flexing, ordinary paint or vinyl stick-on numbers will not stay on an inflatable boat for more than a few weeks. But we don't stop there! We mix our Sealant in our Top Side Paint to further enhance the airtight integrity of your inflatable.
Inland Marine Top Side Paint is available in Red, International Orange, Yellow, Royal Blue, Grey, Black or White. (With changing weather conditions in many areas boaters frequent, International Orange or Yellow makes it easy to find your dinghy at the dinghy dock if a "Rum Front" comes through while you're ashore.)
Rename or apply a custom message to your dinghy. (Our favorite is "Refurbished with Inland Marine USA Products," but we do see a lot of "If Found Return Captain to [Boats Name].")
Each kit contains a complete set of 3-inch high stencils with all numbers and letters, a brush and our special paint in your choice of colors. zthere's more than enough paint to provide a permanent registration number and name on your inflatable.
Inland Marine offers a full slate of accessories to enhance your inflatable boating experience -- from quality constructed boat covers in a number of sizes to fit any inflatable -- to bags to stow your gear -- Inland Marine has whatever you're looking for!
If your inflable boat is leaking, Inland Marine can help you get that dinghy back in ship-shape fast! Our Sealant can help seal those leaks from within -- permanently and affordably! And if you have tears or your dinghy is coming apart at the seams, our Patch Kit and PolyMarine glues can get you back on the high seas in no time!
Oh no! My dinghy has a hole! And a tear! Not to worry!! Inland Marine is on the spot -- with products that will help! Our Patch Kit will have your inflatable looking like new in no time! Just pick your color and see our easy-to-follow instructions to discover how easy a repair job can be! Don't forget to pick up a ClamSeal for emergency repairs before you get to shore.
If your inflatable boat is starting to show its age -- there is no reason to despair! Why spend thousands on a new dinghy when Inland Marine's specially formulated products can get your old dinghy looking like new again -- for a whole lot less? Our Liquid Rubber can patch worn spots, or re-skin your entire dinghy! And our Topside Paint can help you finish the job so your inflatable looks as good -- or better -- than it did the day you bought it!
If your dinghy is so dirty that you should not take it out in public, you have come to the right place! Inland Marine has the products that will help get that dinghy sparking clean -- and help keep it that way! Our Nautical Ease Inflatable Cleaner is used by many US Coast Guard stations and is the number one product for cleaning inflatable boats on the market today. And don't forget our Nautical Ease Inflatable Boat Protectant, the most innovative protectant for all brands of inflatable boats available today. Safe for all PVC and Hypalon fabric.
Is your inflatable boat missing its numbers? Well, not only is that frowned upon by the enforcers of the high seas -- it looks like your dinghy has an identity problem! Make your dinghy stand out with Inalnd Marine's do-it-yourself Inflatable Boat Numbering Stencil kit! Just pick a color that won't clash with your boat!