Inland Marine Liquid Rubber is truly a unique breakthrough in the rubber field. For the first time we are able to get 100% pure EPDM liquid-form rubber to cure without vulcanizing (applying high heat and pressure at the same time, which is what the manufacturer did when your boat was made). The consistency of honey, Liquid Rubber “paints” on to form a seamless, leakproof membrane of pure rubber. Available in black, gray or white, one quart will renew a 10-foot boat with a coating 5-7 mils thick, when applied according to the easy-to-follow instructions. (If you can paint a wall, you can do this!) Since the original skin of most inflatable boats is 5-6 mils thick, Liquid Rubber truly renews and restores your boat to its new condition, even if your boat has lost some of its outer skin and even if the fabric is showing through. Years of use can wear the outer surface of your inflatable; abrasion and UV exposure can make your boat look old and worn-out and can cause slow leaks. Use Inland Marine Liquid Rubber to spot-repair or reinforce those heavy wear spots before they wear through. Or, re-skin the entire boat with Liquid Rubber to add years of serviceability to your boat. Liquid Rubber can be used again and again in the future to restore your boat’s original look. Available in three (3) colors to help match your original inflatable skin color.